Each Tube Cleaning System includes two Tube End Caps that seal the ends of standard CPAP/BiPAP Tubing so your cleaning solution can be swished through the hose without leaks or spills. For a deeper clean leave the solution to soak inside the tube while hanging (with the tubing ends facing up) from the Tubing Bridge.

When you're finished remove the End Caps and empty the cleaning solution from tube, rinse the hose thoroughly and drape it over the Tubing Bridge (with the tubing ends facing down) to dry.

The Tubing Bridge can be hung conveniently in nearly any location. Use the Hanger Hook Attachment to hang it from a shower rail, bathroom door, clothing rack, towel rail, curtain bar, or any similar location; or use the Suction Cup Attachment to hang the Tubing Bridge from smooth surfaces like tiles or glass.

INSTRUCTIONS

1. Insert a Tubing End Cap into one end of the tube to be cleaned.
2. Fill the tube with a cleaning solution of your choice. We recommend Control III Cleaning Solution & Disinfectant; or a solution of mild soap and warm water.
3. Seal the other end of your tubing with the remaining End Cap
4. For a quick clean swish the cleaning solution, agitating it within the tube, to coat all surfaces. For a deeper clean hang the tube from the Tubing Bridge, with the end caps up and the tubing loop down, to allow the cleaning solution to thoroughly soak the inside of the hose.
5. Once cleaning is complete remove the Tubing End Caps and thoroughly rinse the hose with clean running water.
6. Hang your tube to dry by resting the tubing loop over the top of the Tubing Bridge with the uncapped end caps hanging down. Snap the tubing into the pre-molded channels in the Tubing Bridge to lock it into place while drying.

Compatibility:

• Standard 22mm Tubing with Rubber Cuffs - End Caps will fit snugly into the Rubber Cuffs; and Tubing will snap into the Tubing Bridge channels when hanging to soak or dry.
• Slim 15mm Tubing with Rubber Cuffs - End Caps will fit snugly into the Rubber Cuffs; however because Slim Tubing is thinner than Standard Tubing it will NOT snap properly into the Tubing Bridge. Tubing can still be hung over the bridge to dry but it may not hang properly to soak.
• Heated 22mm Tubing - In most cases Heated Tubing has specialized connectors at the "machine end" and standard connectors at the "mask end." End Caps will NOT fit the specialized connector end; but will generally fit the standard connector end. Heated 22mm Tubing should snap properly into the Tubing Bridge channels when hanging to soak or dry.
• Heated Slim 15mm Tubing - In most cases Heated Tubing has specialized connectors at the "machine end" and standard connectors at the "mask end." End Caps will NOT fit the specialized connector end; but will generally fit the standard connector end. Heated 15mm Tubing will NOT snap properly into the Tubing Bridge. Tubing can still be hung over the bridge to dry but it may not hang properly to soak.