The SoClean is an automated CPAP/BiPAP equipment cleaner and sanitizer. With SoClean you can sanitize and disinfect your mask, hose and humidifier chamber without needing to take any pieces apart every day. The machine does not require water or any messy chemicals. Your equipment remains completely dry.

Usage Information: This adapter will only work with a Heated Humidifier and AirSense 10 CPAP or AirCurve 10 BiLevel Machines. It is NOT required if you are not using a heated humidifier.

AirSense 10 & AirCurve 10 Adapter Installation:

1. Detach the injection fitting and short hose from the main SoClean hose. (You will no longer need these items for this setup; but save them in case you need them in the future.)
2. Remove the original lid from the humidifier chamber (reservoir) base by opening the lid fully, pushing one side of the hinge tab outward and freeing the lid from the base.
3. Lift the gasket from the original lid and transfer it to the new lid.
4. Attach the new adapter lid, with the black injection hose, to the humidifier chamber base by inserting the left pin into the left notch; and then pulling the lid toward you and inserting the right pin into the right notch.
5. If needed, add water to your humidifier chamber reservoir. Close the new adapter lid and insert the chamber into your CPAP unit as you normally would.
6. Connect the main SoClean tube by pushing it onto the end of the port of the adapter lid.
7. When you need to add water to your chamber remove the SoClean tube from the adapter lid and remove the chamber from the CPAP. Add water and reinsert into the CPAP machine and then reconnect the SoClean hose. NOTE: The SoClean hose must be attached to lid at all times when using.